Sale!

Twister T2 Trimmer For Sale

$15,219.00 $14,302.00

The Twister T2 Trimmer is our number one seller for commercial outdoor and large indoor facilities. This machine is a workhorse. When you have 1000’s of pounds and or acres to trim the T2 will get the job done. It has heavy-duty wheels and easy to grab handles so you can take this trimmer right to the edge of the outdoor crop and get working on site. It’s also perfect for an inside operation. Most of our commercial clients use the full T2 trimming system. When you combine multiple T2’s, Rails, and Conveyors you will benefit from a trimming system that will deliver a very high output per hour while keeping the quality at its best.

The Twister T2 trimmer comes standard with the leaf collector.

If you need to save your trim for extraction you can use the TrimSaver. It works with wet or dry trim. The TrimSaver collects over 99% of your trim and is ready for extraction immediately. We don’t recommend using the leaf collector trim as there is no comparison to the quality of the trim without it.

If you are a large commercial facility you can do what most of our customers do and run the Twister T2’s in tandem. When you trim wet you can take your output from 35 pounds an hour with one machine to as high as 124 with three in a row working together. If you’re doing dry you can run two machines in tandem and go from 11 to 25 lbs an hour.

Dry trimming is a much more delicate process. We never recommended more than 2 machines when you are trimming dry. It’s just too much time for the flowers to spend in the tumbler.

Another great feature is the Nitraded Blades. They are made of hardened steel which gives them increased tensile strength, corrosion resistance and wear resistance. This means there will be less wear on the blades along with minimal buildup. The blades will stay sharper a lot longer. The materials used to make them are food-safe as well.

More info:

  • Large-Commercial Scale
  • High Output
  • Harvest size: 120+lbs/hr
  • Run Tandem or scale up to Triple
  • Continuous flow and runtime
  • 304 stainless steel tumbler to mitigate the risk of contamination
  • Nitrided steel blades decrease the buildup of residue
  • Flowers spend less than 1 minute in the tumbler
  • Watertight electrical components
  • Watertight motors
  • Cleans easily with a pressure washer.
  • Wheels allow for easy transport whether indoor or outdoor

*Keirton will replace any parts proven defective in material or workmanship without charge
for a period of ten years.

Do you have any questions about the T2? Not sure which machine is right for you? No problem, just give us a call today and one of our experts will assist you.

Call Now 1-866-790-2689

CALL FOR PRICING

Category:

Why Buy a Twister T2 Trimmer From Us?

We recommend purchasing your Twister T2 from a reputable source. One that can help you every step of the way. What good is a trimmer if you can’t get any help when your machine breaks down. We see this all the time and it’s not how we do business. Not only will we get you the best price, but we will also be able to provide you with the best customer support. With over ten years of working in this industry, we have seen it all. Whether it’s machine issues or you aren’t getting the cut you’d hope for, we’ve got your back. I almost forget, we also give 15% off of all parts for the life of the trimmer when you purchase from us.

Not sure which Twister Trimmer is right for you? No problem, give one of our experts a call today and we will get you the right machine for your harvest.

Call Now 1-866-790-2689

Wet Trimming or Dry Trimming?

It’s very important to have a solid plan in place before harvest time. If you’re not sure about which process is right for you just give our experts a call. We will ask you some questions to be sure you have what is needed in order to trim wet or dry.

How Much Does the Twister T2 Cost?

The Twister T2 price is $14,302 standard with the leaf collector. You can get the TrimSaver upgrade for $16,078. If you need a higher output then for two machines you are looking at $29,351 for the standard model with the leaf collector and with the upgrade to the TrimSaver, the purchase price will be $32,901 for 2 trimmers.

Used Twister T2 Trimmer For Sale

We do have used machines available from time to time. All of our used models are well maintained and fully power washed before putting them up for resale. We also carry a few on consignment from other growers. If you’d like to sell us your trimmer then just give us a call to sell or to check availability.

Twister T2 Parts and Accessories

We can’t stress enough how important it is to always have spare parts. If you break down without them your trimming line will cease! Below are a few of the parts kits needed in order to have a successful harvest with minimal downtime.

  • Spare Parts Kit for the machine – $999
  • Maintenance Kit for the TrimSaver – $766
  • Gasket Kit for the Trim Saver – $231
  • Parts Kit for the Leaf Collector – $398

Tip: Be sure to purchase multiple tumblers to avoid as much downtime as possible. Just swap and go!

TRIM-SAVER

If you need to save your trim for post-processing we recommend purchasing a TrimSaver in order to collect your trim for extraction. It;s going to make a big difference in the quality of your product.

with or without t4 trim saver

CONVEYORS

With a conveyor setup, you can really streamline your trimming line. If you’re looking to see if you have room available we do have floor plans available to compare to your space. We can get you set up and running in no time. If you’re interested in learning more just give us a call.

Call Now 1-866-790-2689

Here’s a Quick Review of the Trimmer and Accessories

Twister T2 Trimmer:

  • Input Voltage – 120V, 60Hz
  • Current Draw – 15.5A
  • Blade Motor – 1HP, 750 W, Fan Cooled, Stainless
  • Tumbler Motor – 1/30HP, 25W, Epoxy Coated, Watertight
  • Weight – 215 lbs
  • Shipping Weight (complete w/leaf collector) – 420 lbs
  • Cut Height – .040″ / 1/25 / 1mm
  • Length – 42.5in
  • Width, with wheels – 27.5in
  • Width, without wheels – 20.5in
  • Height – 32.5in
  • Circuit Breaker Required – 20A, 120V
  • Height without wheels – 30.5in
  • Discharge – 6″

Leaf Collector:

  • Input Voltage – 230V
  • Motor – 2HP, UL & CSA Approved, Fan Cooled
  • Amps (running) – 9
  • Amps (startup) – 45A
  • Motor Speed – 3450 RPM
  • Airflow Capacity – 1700 CFM
  • Static Pressure – 10.5in of H20
  • Impeller – 12″ / 305mm, Balanced Aluminum
  • Inlet (cyclone) – 6″
  • Height – 36in
  • Weight – 123lbs
  • Circuit Breaker Required – 15A / 240V
  • Connector (plug) – 15A 250V (NEMA 6-15)
  • Sound Rating – 80 db
  • Fused – Yes
  • Collection Bag – 3 – 6 Mil
  • Generator Requirement – 10,000W
  • Maintenance – Clean impeller housing frequently. Replace filter bag.
  • Extension Cord Gauge – 12AWG MINIMUM Extension Cord Length: 25′ / 7.6m MAXIMUM
    *Failure to meet these minimum requirements could cause damage*

TrimSaver:

  • Input Voltage – 230V
  • Motor – 3 hp
  • Amps (running) – 15A
  • Amps (startup) – 49A
  • Motor Speed – 3450 RPM
  • Airflow Capacity – 1400 CFM
  • Static Pressure – 12″ W.G.
  • Impeller – 12.75″
  • Operating Conditions – 950A CFM @ 6″ W.G.
  • Height – 72″
  • Weight – 123lbs
  • Circuit Breaker Required – 20A, 240V
  • Connector (plug) – NEMA 6-20P
  • Sound Rating – 80 db (PLEASE WEAR PROTECTIVE EAR GEAR)
  • Included Filter Bags – 70 Micron, 40 Micron
  • Certifications – CSA

If you’re looking for a smaller option check out the twister t6 trimmer.

Additional Information

Weight 420 lbs
Dimensions 42.5 × 27.5 × 20.5 in

Reviews

There are no reviews yet.

Be the first to review “Twister T2 Trimmer For Sale”

Your email address will not be published. Required fields are marked *

Scroll to Top